A metal roof in Florida typically runs about $40,000 to $100,000 installed depending on the material and roof size, with premium standing seam at the higher end and simpler exposed fastener panels starting lower. Metal stands up to Florida sun and hurricane winds, reflects heat to cut cooling costs, and can last forty to seventy years. ICAS Storm Restoration installs metal roofs with our own licensed and insured crews.
Pick your area for local metal roofing costs and a free estimate.
Apopka has grown from its plant nursery and foliage roots into one of the fastest growing cities in Orange County, so newer subdivision roofs sit near older rural properties on acreage. Hail and straight line winds off the summer storm lines are the recurring threats this far inland. Census figures put the median Apopka home at about 25 years old, built around 2001. Call (321) 486-8948 or book a free estimate for Apopka pricing.
Clearwater spans the Gulf barrier island and a mainland core built heavily in the mid century decades, which leaves a large stock of older roofs in salt air. Afternoon storms roll in off the Gulf all summer. Roof age is a live insurance issue for many owners here. Pinellas building rules and the barrier island wind zone shape reroof permits here, and many condo and townhome associations add their own approval step before work starts. Census figures put the median Clearwater home at about 48 years old, built around 1978. Call (321) 486-8948 or book a free estimate for Clearwater pricing.
Kissimmee carries a heavy mix of primary homes and short term rental properties serving the attractions corridor, most built from the 1980s onward. Rental owners tend to discover roof problems late because nobody is home to notice a stain. Storm lines crossing Osceola County bring hail and wind through every summer. Per American Community Survey data the median home in Kissimmee was built around 1992, which makes the typical house about 34 years old. Call (321) 486-8948 or book a free estimate for Kissimmee pricing.
Largo's housing largely dates to the 1960s through the 1980s, including some of the largest manufactured home communities in Pinellas County, so aging roofs are the norm rather than the exception. Central Pinellas also catches the full run of summer storms crossing the peninsula. Per American Community Survey data the median home in Largo was built around 1978, which makes the typical house about 48 years old. Call (321) 486-8948 or book a free estimate for Largo pricing.
Melbourne's housing grew with the Space Coast, so a large share of homes date to the 1960s and 1970s boom with newer waves layered around them. Atlantic salt air ages fasteners and flashings, and the county's exposure to east coast hurricane tracks keeps wind mitigation on every insurer's mind. Between the Indian River lagoon and the beachside causeways, a lot of Melbourne roofs live within reach of salt spray, and insurers price that exposure into wind mitigation credits for updated roofs. The typical Melbourne home dates to around 1984 per Census data, roughly 42 years of Florida weather and daily use. Call (321) 486-8948 or book a free estimate for Melbourne pricing.
Orlando roofs cover housing from every era of the metro's growth, from prewar bungalows near downtown to the stucco and shingle subdivisions that spread with the parks economy. The inland position does not spare it: hail rides the I4 corridor and recent hurricane seasons have pushed wind claims far from the coast. Insurers here watch shingle age closely. Tile is common on the higher end subdivisions of the southwest metro while shingle dominates elsewhere, and reroof permits run through county or city building departments depending on the address. Census figures put the median Orlando home at about 35 years old, built around 1991. Call (321) 486-8948 or book a free estimate for Orlando pricing.
Palm Bay spreads across one of the largest platted lot grids in Florida, laid out by General Development Corporation, with most homes built from the 1980s onward in concrete block. Those roofs are now aging together, street by street, and Atlantic storm exposure makes roof condition a standing insurance question. The typical Palm Bay home dates to around 1992 per Census data, roughly 34 years of Florida weather and daily use. Call (321) 486-8948 or book a free estimate for Palm Bay pricing.
St. Petersburg sits on the Pinellas peninsula with water on both sides, so salt exposure is constant and mid century concrete block homes dominate whole neighborhoods. Many of those homes are on their second or third roof already. Wind driven rain off the Gulf and the bay finds aging tile and shingle fast. Per American Community Survey data the median home in St. Petersburg was built around 1969, which makes the typical house about 57 years old. Call (321) 486-8948 or book a free estimate for St. Petersburg pricing.
These are typical installed ranges for a single family home in Florida. The material and roof size drive the price. Your exact number comes from a free on site inspection.
| Metal roof type | Typical installed range |
|---|---|
| Exposed fastener panel | $18,000 to $40,000 |
| Standing seam | $40,000 to $90,000 |
| Premium or large standing seam | $70,000 to $100,000 |
| Aluminum for coastal homes | $45,000 to $100,000 |
Figures are typical ranges and vary by project. Your free estimate is exact.
ICAS Storm Restoration measures your project and gives you a clear written estimate at no cost.
We are a local contractor and we stand behind every job. You are not handed off to a subcontractor. Every job follows the same disciplined process:
Metal is one of the best roofing choices for the Florida climate. A properly installed metal roof carries a high wind rating that stands up to hurricane season, reflects the intense sun to lower cooling costs through the long hot summer, and sheds the heavy rain that comes with daily storms. Near the coast, aluminum resists salt air corrosion. Many insurers also offer wind mitigation credits for a code rated metal roof. ICAS Storm Restoration installs metal roofs built for Florida weather.
A metal roof in Florida usually runs about $40,000 to $100,000 installed depending on the material and roof size. Simpler exposed fastener panels start lower at about $18,000 to $40,000, standing seam runs about $40,000 to $90,000, and premium or large standing seam roofs reach $100,000. A free inspection from ICAS Storm Restoration gives you an exact price.
Standing seam hides its fasteners under raised seams, sheds water well, and lasts the longest, which is why it costs more at about $40,000 to $90,000. Exposed fastener panels cost less at about $18,000 to $40,000 and perform well when installed correctly. ICAS Storm Restoration walks you through the tradeoffs during your free estimate.
It can do both. Many Florida insurers offer wind mitigation credits for a code rated roof, and a reflective metal roof pushes back the sun to reduce cooling costs through the summer. ICAS Storm Restoration installs to the wind ratings that qualify and can point you to a wind mitigation inspection.
A quality metal roof commonly lasts about forty to seventy years, far longer than asphalt shingle in the Florida sun. The finish and fasteners matter, which is why proper installation and the right coating are worth it. ICAS Storm Restoration backs the work with a workmanship warranty on top of the manufacturer coverage.
No more than other roofs. A metal roof installed over solid decking with underlayment is about as quiet as shingle inside the home, and the heavy Florida rain is not the drumming sound many people expect. ICAS Storm Restoration installs over a solid deck, not open framing.
Yes. A properly installed, code rated metal roof is one of the strongest choices for a hurricane zone and carries a high wind uplift rating. ICAS Storm Restoration installs metal roofs to Florida Building Code wind requirements so your roof is built for named storm winds.
Yes. ICAS Storm Restoration is a state certified, licensed and insured Florida roofing contractor (license CCC1332141) and a GAF Master Elite certified installer. Every metal roof is installed by our own crews and backed by a workmanship warranty.
Yes. ICAS Storm Restoration offers financing options so the longer lasting metal roof fits your budget instead of waiting. We go over the plans during your free estimate along with the firm written price.
For many homeowners in Florida, yes. Metal costs more up front than shingle but lasts decades longer, stands up to hurricane winds, reflects heat to cut cooling costs, and can earn insurance wind credits. ICAS Storm Restoration helps you weigh the up front cost against the long life during a free estimate.
Reach out to ICAS Storm Restoration and we schedule a free on site inspection in Florida, measure the roof, review panel and color options, and hand you a clear written estimate with no obligation.
A metal roof in Florida runs $18,000 to $100,000 installed depending on panel type, compared with close to $15,000 for an asphalt shingle replacement on a typical 1,500 square foot roof. The gap narrows over time because shingles in Florida heat and humidity typically last 15 to 25 years, while a properly installed metal roof lasts 40 to 60 years, so a shingle roof is often replaced twice before a metal roof is replaced once. What moves the metal number is panel type, roof size and complexity, and location: exposed fastener panels are the entry tier, standing seam costs more for hidden clips and thicker gauge, and homes near salt water need aluminum to resist corrosion. Hip roofs with many valleys and dormers add labor, and tearing off two existing shingle layers adds disposal cost. Per ICAS Storm Restoration's published price table, exposed fastener panels run $18,000 to $40,000, standing seam $40,000 to $90,000, and aluminum for coastal homes $45,000 to $100,000.
Metal roofing in Orlando FL typically runs $18,000 to $40,000 installed for an exposed fastener panel roof and $40,000 to $90,000 for standing seam. Premium or large standing seam jobs reach $70,000 to $100,000, and aluminum panels specified for coastal homes run $45,000 to $100,000. Panel type is the biggest lever: exposed fastener systems use fewer parts and go on in 2 to 4 days, while standing seam hides every fastener under a folded seam and usually takes 3 to 7 days. Roof size, pitch, the number of valleys and penetrations, and whether the old roof must be torn off all move a quote within those ranges. Gauge matters too, since 24 gauge steel costs more than 26 gauge but resists denting from hail and wind driven debris. Metal roofs commonly last 40 to 70 years, roughly double an asphalt shingle roof. Ask for a written scope that lists panel profile, gauge, underlayment, and fastener type before comparing bids. The ranges above come from ICAS Storm Restoration's published price table, and its own crews install every tier.
Local, licensed and insured, and proud to do the work ourselves. Tell us about your project and we will give you a clear written estimate at no cost.
Request My Free Estimate →or call (321) 486-8948